mach lander 3d printable car transformer toy 3d print model Modelo de Impressão 3D

$5.00
Licença:
mach lander 3d printable car transformer toy 3d print model Modelo de Impressão 3D
$ 5.00
Retirar do favoritos Colocar Item nos favoritos
  • Coleção:
    No
  • Pronto para impressão:
    Yes
  • Scan 3D:
    No
  • Conteúdo adulto:
    No
  • PBR:
    No
  • Visualizações:
    4140
  • Data:
  • ID do Item:
    217805
  • Avaliação:
Denunciar este item
the archive contains 2 folders:
- a folder with the full set of print-ready parts which were redesigned to make the assembly easier
- a folder with the full set of print-ready parts which are fully compatible with the original toy

assembly.pdf
https://drive.google.com/open?id=1nyaofwsf0xjrabj437lhoqgjey5yat7w

to assemble the toy you will need some additional things which you can see on the attached image (for more details please download assembly.pdf):
- 2 pins which contain small nails which are suitable to hold front wheels
- 2 metal spikes 2.2x29mm and 2.2x51mm (hard 2.2mm metal wire will be ok)
- an m3 screw (3x18mm) and a nut for it
- 7 pieces of 5.5mm screws
- 2 screws with a wide head, 5mm long

recommended printing settings:
- every part already has the correct position for printing (the main part will have a lot of support but it is necessary to print the face of the toy correctly and avoid any skewing, if the main part will be somehow skewed. then other parts will look misplaced after the assembly)
- it was tested in abs and pla
- layer height: 0.1
- infill density: 5%
- support: only touching buildplate
- support pattern: concentric
- support density: 20%
- buildplate adhesion type: raft
Precisa de mais formatos?
Se precisar de um formato diferente, por favor abra um novo Support Ticket e solicite isso. Podemos converter modelos 3D para: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Não convertemos cenas 3D e formatos como .step, .iges, .stp, .sldprt.!

Download mach lander 3d printable car transformer toy 3d print model Modelo de Impressão 3D stl De soundsbeard

transformer car formula toy 3d printable mach lander brave fighter legend da-garn
NEMOG
NEMOG NEMOG  2024-08-16
So far, I had no problem printing the file. The only thing I would say is that the supports are like very hard to remove because of the raft style.
The model is accurate enough to the real toy.
TaxaCompradorPreçoData
Positivo

Very nice model.

The only thing I've got to say is that the raft support are difficult to remove, and that it can be very tricky to find the right screws to assemble it.

Otherwise it took approximately 11 hrs to print with a 1.2 layer height and ironing enabled (for better surface finish). Note that IMO the piece are not always oriented correctly to minimize the amount of support or favorize the surface finish.

The 3D model is accurate enough to the real toy that's for sure.

Thanks for the modeling!

$5.002024-08-19

Items relacionados De mach lander 3d printable car transformer toy 3d print model

source files mach lander 3d printable car transformer toy Modelo de Impressão 3D
-40%
Tracer Blaster Mach T Skin - Overwatch - Printable - STL OBJ CAD bundle - Commercial Use Modelo de Impressão 3D
-40%
Tracer Blaster Mach T Skin Skin - Overwatch - Printable - STL files Modelo de Impressão 3D
-40%
Overwatch - Part 2 - 14 Printable models - STL - Personal Use Modelo de Impressão 3D
robot transformer from 90 toy Modelo de Impressão 3D
Mustang Mach 1969 3d print model Modelo de Impressão 3D
-40%
Overwatch - Part 1 - 15 Printable models - STL - Personal Use Modelo de Impressão 3D
-40%
Star Trek - Part 1 - 11 Printable models - STL - Personal Use Modelo de Impressão 3D
-40%
Star Trek - Part 2 - 11 Printable models - STL - Personal Use Modelo de Impressão 3D
-40%
Halo - 13 Printable models - STL - Personal Use Modelo de Impressão 3D