Ahsoka Tano Lightsaber 3d print model Modelo de Impressão 3D

Highly detailed models of Ahsoka Tano's two lightsabers from The Mandalorian television series. Also, the same lightsabers will be used in the future Ahsoka series.

The models have been worked out in detail. Every little detail was explored in footage from the series and extra behind-the-scenes footage of the series The Mandalorian and Ahsoka.

The dimensions of the lightsabers were obtained by scaling the footage from the shoot relative to the size of the actress's hand.

Long Lightsaber:

Model dimensions:
- length – 304 mm
- height – 77 mm
- width – 30 mm

The model consists of:

Ver1 - sight not divided into parts
Ver2 - sight divided into 16 parts for printing

Short Lightsaber:

Model dimensions:
- length – 225 mm
- height – 53 mm
- width – 30 mm

The model consists of:

Ver1 - sight not divided into parts
Ver2 - sight divided into 18 parts for printing

The swords are divided in such a way that individual parts can be printed with plastic of the same color as the part. The part name indicates the color of the part.

Saber separated into smaller printable STL parts for 200 mm print beds

3D Model fully ready for Simple 3D printing FDM ,SLS and SLA printer.

Separately, taking into account printing on printers with a small print area. But you can split it yourself as you need. The model file is attached in one piece.

Formats: .OBJ .STL .SAT .STEP .XB .XT .IGS .SLDPRT