BeastBound Guardians Anthro Warrior Collection Modelo de Impressão 3D

Meet the BeastBound Guardians, a lineup of 15 fierce anthropomorphic warriors—from armored rhinos and cyber-gorillas to amphibious knights and soaring avian sentinels. Each full-body model is delivered as a single optimized mesh, ready for slicing and printing without assembly hassles.

These designs were born from the creative spark of AI-powered 3D generators and then polished by an artist’s hand, combining cutting-edge procedural creativity with human flair. Perfect as desk ornaments, tabletop miniatures, or shelf-king guardians, they’ll bring character and epic style to any collection.

Recommended Print Settings

• Printer type: FDM / FFF

• Material: PLA (standard or matte), PETG for added toughness

• Nozzle: 0.4 mm

• Layer height: 0.15 – 0.20 mm

• Infill: 15 – 20 % (grid or gyroid)

• Supports: Light tree/support touchups under arms and jaw overhangs

• Build plate temp: 60 °C (PLA) / 75 °C (PETG)

• Nozzle temp: 200 – 210 °C (PLA) / 230 – 245 °C (PETG)

• Bed adhesion: Brim (3–5 mm) or glue stick

Post-Processing & Painting

1. Gently remove supports and sand with 200–400 grit.

2. Apply a thin primer to reveal any layer lines.

3. Hand-paint with acrylics or airbrush for vibrant details.

4. Seal with matte or satin varnish to protect your finish.

AI DISCLOSURE

This collection was co-created with AI—leveraging generative 3D tools for rapid concept iterations—then refined by hand to ensure clean topology, printability, and that “wow” factor.