THE WHITE CASTLE INSERTS - ORGANIZER BY AM-MEDIA Modelo de Impressão 3D

**FEATURES**
This is a 3D printable inserts for the board game THE WHITE CASTLE INSERTS, designed to organise ALL the components of the game inside the original box. Thanks to the interlocking lids, you can place the box horizontally or vertically without worries, as nothing will be able to fall out of the box. **Inserts also support sleeved cards**

Easy to print, **100% support-free**
They can be printed on **ALL 3D printers** with a minimum build volume of **180x180mm**
They can be stored in either **horizontal or vertical position**
All boxes have an interlocking lid, **no magnet required!**
Support sleeved cards

**SCALE/DIMENSIONS**
Please do not alter the dimensions of the file as this may make the model unprintable.

**IMPORTANT INFO**
The interlocks of the lids are designed with tolerances suitable for printing with simple home printers, in fact all my inserts are tested with an old Ender 3 first model. I recommend that you print a single insert with its lid first and test the fit before proceeding with anything else, if the fit is too tight it means that you need to calibrate your printer correctly. If you want a flush lock, you need to keep in the box only the manual in your language. The **total** size of the organiser is 167X218. Although rarely, it may happen that due to differences in production, printing and edition, box sizes may vary slightly. Please measure the **inside** of the game box to confirm compatibility.

© 2024 www.am-media.biz - This is a third-party accessory designed by AM-MEDIA. All product names are trademarks of their respective owners, which are in no way associated or affiliated with AM-MEDIA